The following video demonstrates how to install a FOX® Rear Suspension Kit (part number 2881412) onto your Polaris snowmobile. The video includes removing the seat (0:40), elevating the fuel tank (1:07), installing mounts (1:37), removing the shock assembly (2:49), installing the new FOX® air shock (3:40), installing the air fill assembly (4:51), installing the setting decal (5:44), reassembling the fuel tank and seat (6:20), removing the rear track shock (7:25), comparing spacers on the old and new shocks (9:27), installing the new rear track shock (10:00), and how to make adjustments (12:29).
To install the kit, you need a 3/16-inch drill bit, drill, rivet gun, Phillips screwdriver, TORX® screwdriver set, 15mm socket and 15mm wrench.
FOX® is a registered trademark of Fox Factory Inc.
TORX® is a registered trademark of Acument Intellectual Properties, LLC.