Passer au contenu de la page Passer à la navigation Passer au pied de page
POLARIS SNOWMOBILE

CENTRE D'AIDE

9/3/2020
Polaris Snowmobile Security System

Polaris snowmobiles equipped with digital gauges, the Polaris Interactive Digital Display (PIDD) and the 7S display feature security functions that can be activated by an authorized Polaris Dealer. With this feature activated, you can lock the ignition, preventing unauthorized use when you leave your snowmobile unattended. The locked system will limit engine speed to 3,000 RPM. This prevents clutch engagement, and the snowmobile will not move when throttle is applied.

Have the security system activated by an authorized Polaris Dealer

The factory default security code is 000. Change the default security code to one of your own choosing.

Security System for Models Equipped with PIDD
To lock the ignition:

1. Start the engine. Do not allow an engine to run in an enclosed area without adequate ventilation.

PIDD buttons

2. Press Key 3 on your PIDD to display the main menu options.

3. Toggle to SYSTEM SETTINGS > VEHICLE SETTINGS > LOCK.

5. Press Key 3 to select. The ENTER CODE screen will display.

6. Press Key 2 or Key 4 to enter the current three-digit security code. Press Key 5 to toggle to each digit.

7. If the code is not accepted, a BAD CODE screen will display.

8. Follow the prompts and re-enter the current security code. When the code is accepted, the "locked" symbol and ENTER CODE screen display. The ignition is now locked.

To unlock the ignition:

1. Start the engine. The locked symbol and ENTER CODE screen display. Do not allow an engine to run in an enclosed area without adequate ventilation.

2. Press Key 2 or Key 4 to enter the current three-digit security code. Press Key 5 to toggle to each digit.

3. If the code is not accepted, a BAD CODE screen will display. Follow the prompts and re-enter the current security code.

4. When the code is accepted, the "unlocked" symbol and SECURE OFF screen display. The ignition is now unlocked.

Secure off screen

To change the security code:

1. Start the engine. Do not allow an engine to run in an enclosed area without adequate ventilation.

2. Toggle to SYSTEM SETTINGS  > VEHICLE SETTINGS > CHANGE CODE.

3. Press Key 3 to select. The ENTER CODE screen will display.

4. Press Key 2 or Key 4 to enter the current three-digit security code. Press Key 5 to toggle to each digit. If this is the first time you are changing the security code, enter the default code of 000. 

5. After successfully entering the current security code, the CHANGE CODE screen will display. Enter your new three-digit security code. 

6. Any time you change your security code, record the new code in your PIDD Owner's Manual for future reference. Keep your security code in a secure location where others will not be able to access it.

If you forget your security code, see your authorized Polaris Dealer to have the code reset to the factory default of 000. Only authorized Polaris Dealers can reset a lost or forgotten security code.

For more on your PIDD, consult the Owner's Manual.
 

Pin Activated Security System for Models Equipped with 7S

7 S display

The Pin Activated Security System (P.A.S.S.) must be activated by your dealer using Polaris Digital Wrench. See your dealer for setup and activation. P.A.S.S. allows you to safely lock and unlock your vehicle from the Ride Command display screen.

To enable P.A.S.S.:
1. Go to the SETTINGS menu by pressing the Polaris button followed by the ALL SETTINGS button.

2. Select VEHICLE SETTINGS from the left toolbar.

3. Select PASSCODE UNLOCK.

4. If this is your first time activating P.A.S.S. you will be prompted to enter a new PIN. Enter and verify the new PIN.

5. Turn off the vehicle, using the key ignition switch.

After activating P.A.S.S. for the first time, you must power down the vehicle and allow the ECM to fully shut down before restarting. This may take up to 3 minutes.

To disable P.A.S.S.:

1. Go to the SETTINGS menu by pressing the Polaris button.

2. Select VEHICLE SETTINGS from the left toolbar.

3. Select PASSCODE UNLOCK.

4. Enter your PIN code to disable P.A.S.S.

Security System for Current Digital Instrument Clusters

Digital gauge

When the security system is activated the security indicator (circled above) will illuminate. Before your first time using the security system, see your authorized Polaris Dealer to have the feature activated in the electronic control unit (ECU).

To lock the system for the first time:

1. Press and hold the center Center button button on the instrument cluster to enter the Options Menu.

2. Press and release the MODE button until SECURITY OFF appears in the Information Display Area.

Security off

3. Press and release the SET button. ENTER CODE will appear in the Information Display Area.

Enter code

4. Press and release the SET button to increase the first digit. The default factory code is 000.

5. Press and hold the SET button to accept the first digit and advance to the second digit.

6. Press and release the SET button to increase the second digit.

7. Press and hold the SET button to accept the second digit and advance to the third digit.

8. Press and hold the SET button to accept the third digit and submit the code. If the code is correct, SECURITY ON will appear in the Information Display Area. The system is now locked. Proceed immediately to unlocking the system.

Security on

If the code is incorrect, BAD CODE will appear in the Information Display Area. Return to step 3 to re-enter the code.

Bad code

To unlock the system:

1. While the engine is running, press and release the SET button. ENTER CO will appear in the Information Display Area.

Enter code

2. Press and release the SET button to increase the first digit.

3. Press and hold the SET button to accept the first digit and advance to the second digit.

4. Press and release the SET button to increase the second digit.

5. Press and hold the SET button to accept the second digit and advance to the third digit.

6. Press and release the SET button to increase the third digit.

7. Press and hold the SET button to accept the third digit and submit the code. If the code is correct, SECURITY OFF will appear in the Information Display Area.

Security off

The system is now unlocked.

If the code is incorrect, BAD CODE will appear in the Information Display Area. Return to Step 1 to re-enter the code.

Bad code

8. You now must enter a new security code.

To enter your new security code:

1. Immediately after locking and unlocking the system, and while SECURITY OFF is displayed, simultaneously press and hold the MODE and SET buttons. SET NEW CODE will appear on the Information Display Area.

Set new

2. Press and release the SET button to increase the first digit.

3. Press and hold the SET button to accept the first digit and advance to the second digit.

4. Press and release the SET button to increase the second digit.

5. Press and hold the SET button to accept the second digit and advance to the third digit.

6. Press and release the SET button to increase the third digit.

7. Press and hold the SET button to accept the third digit. CODE SET will appear in the Information Display Area and then the new code will blink three times in the Information Display Area. Your new code is now set. The system is NOT locked.

Code set

8. Record your new security code in a safe place for future reference.

If you lose your personal security code, see your Polaris Dealer to have the code reset to 000. Any time you wish to change your current security code to a new code, perform the same steps. Instead of using the factory default code of 000, use your current security code.

To lock the system with your personal security code:

1. Start the engine.

2. Press and hold the center Center button button on the instrument cluster to enter the Options Menu.

3. Press and release the MODE button until SECURITY OFF appears in the Information Display Area.

Security off

4. Press and release the SET button. ENTER CODE will appear in the Information Display Area.

Enter code

5. Press and release the SET button to increase the first digit.

6. Press and hold the SET button to accept the first digit and advance to the second digit.

7. Press and release the SET button to increase the second digit.

8. Press and hold the SET button to accept the second digit and advance to the third digit.

9. Press and hold the SET button to accept the third digit and submit the code. If the code is correct, SECURITY ON will appear in the Information Display Area. The system is now locked.

Security on

If the code is incorrect, BAD CODE will appear in the Information Display Area. Return to Step 3 to re-enter the code.

Bad code

To unlock the system with your personal security code:

1. While the engine is running, press and release the SET button. ENTER CODE will appear in the Information Display Area.

Enter code

2. Press and release the SET button to increase the first digit.

3. Press and hold the SET button to accept the first digit and advance to the second digit.

4. Press and release the SET button to increase the second digit.

5. Press and hold the SET button to accept the second digit and advance to the third digit.

6. Press and release the SET button to increase the third digit.

7. Press and hold the SET button to accept the third digit and submit the code. If the code is correct, SECURITY OFF will appear in the Information Display Area.

Security off

The system is now unlocked.

If the code is incorrect, BAD CODE will appear in the Information Display Area. Return to Step 1 to re-enter the code.

Bad code

The following table is a quick reference chart for the procedure of locking and unlocking your security system.

Action Result

 1. Start the engine.

 2. Press and hold the center button.

 3. Press and release the SET button
 until SECURITY appears in the
 Information Display Area.

 4. Press and release the SET button.

 Displays ENTER CODE
 (to lock the system).

 Press and release the SET button. Advances a digit on the
ENTER CODE screen.
 Press and hold the SET button.  Accepts a digit and displays the next
digit position (if any remain)
on the ENTER CODE screen.
 While SECURITY OFF is shown
 on the Information Display Area,
 simultaneously press and hold the MODE and SET button.
Allows the user to change the
security code.


Security System for Older Digital Instrument Clusters

Gauge diagram

When using your security system for the first time, begin by locking your system. The factory default security code is 000. To lock the system for the first time:

1. Start the engine and lock the parking brake.

2. Press and hold the MODE and SEL buttons for 3 seconds and then release. SECURE OFF should be displayed in the Rider Information Center. If not, repeat this step.

3. Wait until ENTER CODE displays and then press and release SEL to advance the digit. When "0" is displayed, press and release MODE to accept the digit. If the ENTER CODE screen exits due to inactivity, repeat Step 2.

4. Press and release SEL to advance the second digit. When "0" is displayed, press and release MODE to accept the digit.

5. Press and release SEL to advance the third digit. When "0" is displayed, press and release MODE to accept the digit.

6. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. The system is now locked.

7. Unlock the system, as detailed below.

To unlock the system for the first time:

1. When the engine is running the display will alternate between SECURE ON and ENTER CODE. Wait until ENTER CODE displays and then press and release SEL to advance the digit. When "0" is displayed, press and release MODE to accept the digit.

2. Press and release SEL to advance the second digit. When "0" is displayed, press and release MODE to accept the digit.

3. Press and release SEL to advance the third digit. When "0" is displayed, press and release MODE to accept the digit.

4. After accepting the third digit, view the display screen. SECURE OFF displays if the system unlocks. The system is now unlocked.

5. You must now enter a new security code.

To enter a new security code:

1. Immediately after locking and unlocking the system, and while SECURE OFF is displayed, press and release the MODE button to bring up the ENTER CODE screen.

2. When ENTER CODE displays, use the SEL and MODE buttons to select and accept each digit of a new personal security code.

3. After accepting the third digit, view the display screen. The new code and CODE SET will display if the system accepted your new code. You will not see this display again. Your new code is now set. The system is not locked.

4. Record your new security code in a safe place for future reference.

To lock the system with your personal security code:

1. Start the engine and lock the parking brake.

2. Press and hold the MODE and SEL buttons for 3 seconds and then release. SECURE OFF should be displayed. If not, repeat this step.

3. Wait until ENTER CODE displays and then press and release SEL to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. If the ENTER CODE screen exits due to inactivity, repeat Step 2.

4. Continue to use SEL and MODE to select and accept the remaining two digits of the code.

5. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. Engine speed is now limited and the snowmobile cannot be driven. When the engine is running, the display will alternate between SECURE ON and ENTER CODE.

6. If BAD CODE displays, the screen will then return to the ENTER CODE screen. Repeat Steps 3-5 to re-enter the security code.

To unlock the security system with your personal security code:

1. When the engine is running, the display will alternate between SECURE ON and ENTER CODE. Wait until ENTER CODE displays and then press and release SEL to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. When the system is locked and engine temperature is above 120 degrees Fahrenheit (49 C), the correct password must be entered within 60 seconds or the engine will shut down.

2. Continue to use SEL and MODE to select and accept the remaining two digits of the code.

3. After accepting the third digit, view the display screen. SECURE OFF displays if the system unlocks.

4. Re-enter your code if BAD CODE displays. The system is now unlocked.

Any time you wish to change your current security code to a new code, perform the same steps. Instead of using the factory default code of 000, use your current security code.

The following table is a quick reference chart for the procedure of locking and unlocking your security system.

Action Results
 Start engine +
 Lock parking brake +
 Press and hold both MODE and SEL 
Displays ENTER CODE (to lock the system)
 Press SEL Advances a digit on the ENTER CODE screen
 Press MODE

 Accepts a digit and displays the next digit position (if any remain)
on the ENTER CODE screen

or

Opens ENTER CODE screen if MODE is pressed immediately
after locking and unlocking the system
(to change your security code)


Security System for Round Gauges

Gauge

The MODE button is found on the instrument cluster, as shown in the above illustration, or on the handlebar, as shown below. The SET button can be found on the handlebar, as shown below.

Set button

When using your security system for the first time, begin by locking your system. The factory default security code is 000. To lock the system for the first time:

1. Start the engine and lock the parking brake.

2. Press and hold the MODE and SET buttons for 3 seconds and then release. SECURE OFF should be displayed in the Rider Information Center. If not, repeat this step.

3. Wait until ENTER displays and then press and release SET to advance the digit. When "0" is displayed, press and release MODE to accept the digit. If the ENTER CODE screen exits due to inactivity, repeat Step 2.

4. Press and release SET to advance the second digit. When "0" is displayed, press and release MODE to accept the digit.

5. Press and release SET to advance the third digit. When "0" is displayed, press and release MODE to accept the digit.

6. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. The system is now locked.

7. Unlock the system, as detailed below.

To unlock the system for the first time:

1. When the engine is running the display will alternate between SECURE ON and ENTER CODE. Wait until ENTER displays and then press and release SET to advance the digit. When "0" is displayed, press and release MODE to accept the digit.

2. Press and release SET to advance the second digit. When "0" is displayed, press and release MODE to accept the digit.

3. Press and release SET to advance the third digit. When "0" is displayed, press and release MODE to accept the digit.

4. After accepting the third digit, view the display screen. SECURE OFF displays if the system unlocks. The system is now unlocked.

5. You must now enter a new security code.

To enter a new security code:

1. Immediately after locking and unlocking the system, and while SECURE OFF is displayed, press and release the MODE button to bring up the ENTER screen.

2. When ENTER displays, use the SET and MODE buttons to select and accept each digit of a new personal security code.

3. After accepting the third digit, view the display screen. CODE SET will display if the system accepted your new code. You will not see this display again. Your new code is now set. The system is not locked.

4. Record your new security code in a safe place for future reference.

To lock the system with your personal security code:

1. Start the engine and lock the parking brake.

2. Press and hold the MODE and SET buttons for 3 seconds and then release. SECURE OFF should be displayed. If not, repeat this step.

3. Wait until ENTER displays and then press and release SET to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. If the ENTER screen exits due to inactivity, repeat Step 2.

4. Continue to use SET and MODE to select and accept the remaining two digits of the code.

5. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. Engine speed is now limited and the snowmobile cannot be driven. When the engine is running, the display will alternate between SECURE ON and ENTER CODE.

6. If BAD CODE displays, the screen will then return to the ENTER screen. Repeat Steps 3-5 to re-enter the security code.

To unlock the security system with your personal security code:

1. When the engine is running, the display will alternate between SECURE ON and ENTER. Wait until ENTER displays and then press and release SET to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. When the system is locked and engine temperature is above 120 degrees Fahrenheit (49 C), the correct password must be entered within 60 seconds or the engine will shut down.

2. Continue to use SET and MODE to select and accept the remaining two digits of the code.

3. After accepting the third digit, view the display screen. SECURE OFF displays if the system unlocks.

4. Re-enter your code if BAD CODE displays. The system is now unlocked.

Any time you wish to change your current security code to a new code, perform the same steps. Instead of using the factory default code of 000, use your current security code.

The following table is a quick reference chart for the procedure of locking and unlocking your security system.

Action Results
 Start engine +
 Lock parking brake +
 Press and hold both MODE and SET 
Displays ENTER (to lock the system)
 Press SET Advances a digit on the ENTER screen
 Press MODE

Accepts a digit and displays the next digit position
(if any remain) on the ENTER screen

or

 Opens ENTER screen if MODE is pressed immediately 
after locking and unlocking the system
(to change your security code)

For more on your snowmobile's instrument cluster, consult your Owner's Manual.

Mots-clés pidd , lock , ignition , code , security , gauge , instrument , cluster , 7s , display , pin , pass ,