If you lose a spare key, contact your Polaris Dealer for replacement assistance.
Your dealer will need the key code from your remaining key to order the correct key blank.
To find your key code, locate the four digits on the original key as shown below.
Note: You may need to remove your rubber key cover to locate the key code.
Older vehicles use a key code dot system. The dot code must be matched from the original key. These keys are square style, as shown below, and are identified by the number of dots on the key. The dots correspond to a letter code, which also can be found on the underside of the ignition switch body if keys are not available.
Polaris only offers key blanks that can be cut using an existing key. These key blanks will need to be cut to match an original key. So if both keys have been lost, you will need to replace the ignition.
For more information, see your authorized Polaris Dealer. To find a dealer near you, use the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.