Skip to content Skip to navigation Skip to footer
POLARIS SNOWMOBILE

HELP CENTER

6/10/2021
Tools and Fasteners Guide

Sockets, wrenches and ratchets (socket wrenches) are used in nearly every vehicle maintenance procedure. This article will explain how each tool works together.

FASTENER TYPES
The fastener you are working with will determine which socket or wrench you will need to use. The following fastener types are used in our maintenance procedures.

Fastener heads

Allen
This is an Allen socket and wrench.

 Allen set

Phillips
This is a Phillips fastener and screwdriver. 

Phillips tools

Flat-head
This is a flat-head fastener and screwdriver.

Flathead tools

TORX®
This is a TORX® fastener and the corresponding wrench and socket.

Torx tools

RATCHETS
A ratchet, or socket wrench, is a tool that has a ratcheting (turning) mechanism that allows for fasteners to be loosened or tightened more easily than with a hand wrench. A socket wrench has an anvil, or drive, on one end that connects the socket to the ratchet. Connect a socket to the ratchet before use.

The three standard sizes of ratchet are 1/4-inch, 3/8-inch and 1/2-inch. These sizes refer to the anvil size of the ratchet. The size of ratchet used is determined by your personal preference and the amount of space you are working with.

Ratchet diagram

SOCKETS
A socket attaches to the anvil of a wrench or ratchet to loosen or tighten a fastener. Below is a diagram of the parts of a socket and an explanation of the important components of a socket. Sockets are measured in fractions of an inch or millimeters, unless noted otherwise.

Socket close-up

Drive socket: The drive socket is the end that attaches to a wrench or ratchet.

Socket head: The socket head is the part of the tool that is used to tighten or loosen the fastener you are working on.

Points: This refers to the shape of the socket head. In this example, a six-point socket head is shown.

Sockets come in 6-point or 12-point styles, shown below. Be sure to use the correct type of socket for the fastener you are using. Note: 6-point sockets apply more torque and are stripped less easily than 12-point sockets.

6-point and 12-point sockets

Universal joint socket: A flexible socket that allows you to reach tight places. Never torque a bolt with a universal joint socket.

Universal Joint Socket

Impact socket: A heavy duty socket rated for use with an impact tool. Chrome sockets like the ones shown above are only rated for use with a hand tool, like a ratchet or torque wrench.

Pictured below are impact universal joint sockets.

Impact Universal Joint Sockets

WRENCHES
A wrench is a hand tool that is used to apply or release torque from a fastener or bolt.

Wrenches

1. Torque wrench: Applies a specific torque (rotational force) value to a fastener. Values are measured in inch-pounds (in-lbs), foot-pounds (ft-lbs) or Newton-meters (Nm).

2. Adjustable wrench: A wrench that allows the size of the opening to be adjusted. 

3. Combination wrench: A wrench with a socket on one end. 

Specialty Wrenches
Some maintenance procedures require the use of specific wrenches like the ones shown and described below.

Oil filter wrench: Attaches to a socket wrench to grip and remove the oil filter.

Oil filter wrench

Spark plug wrench: Attaches to a ratchet and is used to remove spark plugs. A spark plug wrench is included in your vehicle’s tool kit.

spark plug socket

Crowfoot wrench: An extension for torque wrenches to help reach tight areas.

Crowfoot wrench

TORX® is a registered trademark of Acument Intellectual Properties, LLC.